how to stop controller drift ps4. The Roots of PS4 Controller Shake
Analog stick drift is likely to blame if your character or the camera keeps moving even though you haven’t touched the controller. There are two potential causes of drift when using a PS4 controller:
The dirtiness of the analog stick.
Both the analog control stick and the potentiometer are broken.
Regular use will inevitably cause some level of deterioration. The controller should be replaced or repaired before being disassembled if cleaning it doesn’t solve the problem.
Methods for Eliminating Analog Stick Drift on the PlayStation 4 Controller
First, make sure your controller is turned off, and then follow these steps to fix it.
One, you should reset your PS4 controller. Some issues with the DualShock 4 can be resolved by performing a factory reset. The hard reset should be used if the soft reset fails.
The controller for your PlayStation 4 should be wiped down and cleaned. Make use of a dry microfiber cloth to gently wipe the analog stick’s nooks and crannies. A cotton swab moistened with a solution of water and isopropyl alcohol can be used to remove dirt and grime. In the event that you find dirt that you simply can’t get to, you can use pressurized air to eliminate it.
Get a new or fixed controller from Sony for your PS4. It’s possible that the warranty still applies if your controller is fairly recent. To find out if you are eligible for a free repair or replacement, go to the PlayStation Repair & Replace page, select DualShock 4, and then follow the on-screen instructions.
You should take apart your PlayStation 4 controller and wash the analog stick. The controller inputs can be given a thorough cleaning by removing the outer casing and lifting the battery. To remove the stain, use a cotton swab dipped in a solution of water and isopropyl alcohol. If there are any components inside, you should not use pressurized air.
Switch out the analog sticks on your PS4. You can replace the analog sticks and the potentiometer yourself if you have the right tools and are willing to put in the time and effort (the sensor for the analog sticks). You can get the necessary components online, and a soldering iron can be found in any hardware store. Buying a new controller is the easier and cheaper option if you don’t want to do it yourself.
