how to sterilise baby bottles. Bottles and teats, as well as any other feeding utensils, should be kept sterile for the first year.
You may rest assured that your infant will be protected from gastrointestinal illness and other infectious complications thanks to this.
To get ready for sterilization, you must:
As soon as you’re done feeding, wash all the bottles, teats, and other accessories in hot, soapy water.
Clean bottles using a bottle brush (save this brush solely for cleaning bottles) and clean the interior of teats with a little teat brush. Teats can be washed in hot, soapy water after being turned inside out. Teats should never be cleaned with salt because it can be harmful to the infant.
Cleaning the feeding utensils you use for your baby might be as simple as popping them in the dishwasher. The dishwasher can clean feeding equipment, but it won’t sterilise it. Make sure the teats and caps of the bottles are pointing down. Some people prefer to wash their teats by hand to ensure that they are spotless.
Before attempting to sterilize anything, be sure that it has been thoroughly rinsed in clean, cold running water.
You can use the above tips with either expressed breast milk or formula while feeding your baby.
Baby-feeding gear sterilisation instructions
A baby’s feeding tools can be sterilized in a number of different methods. Examples of this are:
The use of ice water to kill bacteria
Using the sterilizing power of steam
Cleansing and disinfecting with cold water
It’s important to stick to the guidelines provided by the maker.
Feeding supplies should be left in the sterilising solution for at least 30 minutes.
Every 24 hours, you should replace the sterilant.
Before placing bottles or teats in the sterilising solution, check for any trapped air.
A floating cover or plunger on your steriliser is necessary to keep all the gear submerged in the sanitizing liquid during the sterilisation process.
Sterilization by steam (electric steriliser or microwave)
As there are numerous steriliser models, it’s crucial to read and follow the manual provided by the manufacturer.
When placing bottles and teats in the steriliser, make sure the apertures are pointing down.
Manufacturers will typically include recommendations for how long equipment can remain in the steriliser before it must be sterilised again.
Inactivating pathogens by boiling
Before you try to boil something to sterilise it, check to see if it can withstand the heat.
Put all of the feeders and their accessories into a large pot of boiling water and let them there for at least 10 minutes.
In order to avoid leaving the stove on by accident, it is recommended to use a timer.
Remember that this procedure increases the risk of teat injury. Be sure to inspect bottles and teats on a regular basis for signs of wear and tear.
